Instrumentation Cables

We Manufacture Wires As Per Clients Specification & Sizes Capacity & Supervised by Qualified & Experienced Hands.

Suppliers of Cables, Manufacturers Of Flexible Cables, PCM Cables, Thermocouple Extension Cables, Mumbai, India

instrumentation-cables

Instrumentation Cables

Techno Flex Cable also exhibits excellent electrical insulation, heat resistance, low coefficient of friction, and non-adhesive properties. This is pretty useful in making various parts of valves for use in a number of industries such as pharmaceutical, Chemical, electrical, thermal power plants, aviation etc, and adept in making these components for all these industries.

Instrumentation links are multi-paired or single components intended to convey signals. They are utilized for interfacing instruments and electrical hardware particularly in plants where interaction control is required, where transducer-created signals are communicated through to boards, regulators, and different gadgets.

Various Kinds of Instrumentation Cables Are As Per the Following :

ARCNET links are Instrumentation Cables that are utilized in high velocity, token-based, ARCNET networks that give neighborhood (LAN) interchanges between modern PCs. AS-I links are utilized to interact twofold with actuators, sensors, and other AS-I gadgets. These two-center links supply power and move information.

CAN-bus links are utilized in rapid, sequential information networks that are intended for brutal electrical conditions. They are utilized generally in the car business. CANopen links are utilized with a modern interchanges field-transport convention that depends on CANbus.

Techno Flex Cable is one of the best Instrumentation Cables Manufacturer, Instrumentation Cables Exporter, Instrumentation Cables Supplier in Mumbai India. We serve this product in all over countires. If you want this Instrumentation Cables then please order Now !

CONDUCTOR :
Annealed bare/ uniform coated with Tinned/Silver Platted, High Conductivity, and Electrolytic Grade Solid/Stranded/Flexible Conductor.

INSULATION :
Conductor are insulated with General Purpose PE / HR / FRLS / LSZH / PVC Compound / or any other dielectric material as per customers specification.

COLOUR OF DIELECTRIC :
Cores are identified with different type of color scheme as per requirement as below:-

  1. As per IS:1554[Pt-I]:88, 694:90.
  2. As Per IEC, ITD or number Printing.
  3. As Per Customers Scheme.

PAIR/TRIAD/QUAD :
Two/Three/Four cores are uniformly twisted together to form a Pair/Triad/Quad with maximum lay length 80 mm/as per requirement of customer. The lay shall be so chosen as to minimize cross talk in the cable.

INDIVIDUAL SHIELDING :
If required, Individual Shielding may be of Poly Aluminum [Thin Layer of Aluminum Foil bonded to Polyester Film] Tape with Annealed Tinned Copper Drain Wire. It prevents the shorting of adjacent shield and minimizes the cross talk and ground loops. A Tinned Copper drain Wire is installed to provide continuous contact with the shield and allow to connection to ground. Tinning the drain wire reduces galvanic corrosion between drain and shield.

LAYING OF PAIRS/TRIAD/QUAD :
Pair/Triad/Quad are laid up with suitable lay. The outer most layers are right hand lay and successive layers are laid up with opposite lay. Then, a Polyster Tape is provided to bind up laid up Pair/Triad/Quad.

OVERALL SHIELDING :
If required, Overall Shielding may be of Annealed Tinned Copper Braiding / Poly Aluminum [Thin Layer of Aluminum Foil bonded to Polyester Film] Tape with Annealed Tinned Copper Drain Wire. Braiding ATC Shield has high tensile Strength and provides better coverage in flexing application. They are easier to terminate. This provides effective shielding; cross talk and noise are kept to an absolute minimum.

INNER SHEATH :
The laid up pair/triad/quad after shielding are provided with an inner sheath, which may be either Extruded Inner Sheath or wrap with PVC Tape.

ARMOURING :
It is applied over inner Sheath. It may consist of galvanized Round Steel wires or galvanized Flat Steel Strips.

OUTER SHEATH :
It is applied over Armouring in case of Armoured Cable or over Inner Sheath in case of Unarmoured Cable. The Color of Sheath is Black or Grey. The Sheath material may be General Purpose/HR / FRLS / LSZH PVC Compound as per requirement of specification.

TYPICAL APPLICATION :
For Connection of Instruments, Process Control Systems, Computers, Data Transmission etc.



Click Here to Download

Get Free Quote